• For removing hub end caps while servicing the hubs or converting them to different standards
• Thanks to the expanding mechanism, which grabs the hub cap evenly from the inside, even the most stu...
• Set includes 6 pcs of arm for inner bearing dimensions 6.5-8,10-12, 12-15, 17-20, 22-28, 30-36
• Used for pulling different types of bearings. The bearing is gripped from the inside side and pull...
• Unior’s 1689.6 Lefty adaptor is used for truing Cannondale’s Lefty® front wheels, which have specific asymmetric shape and dimension and therefore cannot be used on the centering stand with norma...
• Use the magnetizer to magnetise the screwdriver’s tip so that the screws stick to the tip.
• The tip can be demagnetised by pushing the tip and the shaft into the magnetizer’s opening marked with...
• Compatible with chains from 6–12-speeds. Including: SRAM AXS flat top chain, Campagnolo 11- and 12-speed chain peening, and most single speed 1/8'' chains
• Includes: Long and short derailleur ch...
• The smaller end is used for nipples with a 6.4mm outside diameter, while the larger end is used for assembling and disassembling for tubeless Mavic rim inserts.
• Metal tire levers are used on wheels where mounting and dismounting the tires with plastic tire levers is difficult or impossible.
• Can be stuck behind the spoke, with help of the hook on the en...
• A must have wheel building tool. Rotating handle and the guide shape enables you to quickly screw the nipple onto the spoke. It supports standard shape nipples.
• Used to remove and install Shimano® Hollowtech II, Campagnolo® Ultra-Torque and Power Torque, Race Face®, FSA®, SRAM®, Truvativ®, Chris King® bottom brackets as well as many and others. The 1609/...
